web analytics
Smoothing the chiseled stone. - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
3 of 3 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Smoothing the chiseled stone.

  • Filter
  • Time
  • Show
Clear All
new posts

  • Smoothing the chiseled stone.

    My son took a couple pictures today of me smoothing a cut face on the concrete blocks of the stand.

    Cutting and fitting are very important to most people making ovens, and I found that cutting firebricks with a chisel yields a fairly smooth surface.

    To get the brick to fit more as planned, one needs to take off the high spots.

    I used a couple techniques that were pretty 'caveman' ( as my children say) but got the job done with no electricity on site. Either rub the cut edge against the block of the base, or if there is alot to remove, just use a 16 penny nail as a 'point' chisel, and remove material that way first.

    Cutting at an angle ( even a compound angle) is not that difficult. Smoothing out the cut sides, goes pretty fast just rubbing against the blocks...The difficult part is transferring the dimensions from the oven to the stone.

    Anyway, this may not be a full fledged 'Technique', but I think it is a handy complement to the notion of making the entire oven with no power tools.

    Attached Files
    This may not be my last wood oven...

  • #2
    Re: Smoothing the chiseled stone.

    hey Lars, that's a nice looking oven! I am impressed by the power-tool-free build. Glad you are sharing your techniques. Looks like the kids are having fun too.



    • #3
      Re: Smoothing the chiseled stone.

      I have to say, I have been watching your build as well. I like your base, too!

      It can be confusing with so many nice looking ovens on this forum, but yours always stands out and looks particularly pristine.

      I am thinking of stone facing my stand, and then putting a brick arch across the opening. After seeing yours, I think I might just plan on that.

      I am using bricks mostly to protect the firebrick, house the corners of the dome insulation, give the stucco dome a nice base to attach into, and then also to buttress my front most arch ( which, you have made circular and thereby reduced the lateral forces to a non-issue)

      This forum is so great because you don't feel so alone knowing that people all over the world are experiencing a similar level of joy and frustration while building this, in a way, arcane and antiquated structure.

      Frankly, though, I am surprised that chisel powered building is not more predominant, and for the same reason very grateful that I can, hopefully contribute something meaningful to the discussion. ( lowly peasant that I am)

      This may not be my last wood oven...


      • #4
        Re: Smoothing the chiseled stone.

        i started cutting a lot of my firebrick with a chop saw with a masonry blade, soaking the bricks in water to keep the dust down, but still the noise and dust were unaceptable. I went to the garage, got a brick chisel, hand filed a good edge on it and cut the rest of my bricks that way, faster easier and quieter, Most cut in one shot, I learned a lot building my oven and im hoping to talk a friend into building one so i can share what i know, But thats also whats good about this forum... good luck


        • #5
          Re: Smoothing the chiseled stone.

          Hi Mark,
          Your oven looks great, and so does the pizza.

          You know, I never even thought about using the saw, but it is interesting that you tried both methods and abandoned the tile saw. I think it would be great to have those tapered bricks, but I cut my bricks at a taper and used cut side in the mortar joint.

          How did you support all your chimney weight on that arch? was there ever an issue of lateral forces pushing your supports out?

          Also, did you make you hearth bricks 4.5" thick?

          This may not be my last wood oven...