web analytics
Husky 7 Bearing replacement - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

Forum Issues Update

Things are progressing in getting things back in order on the Forum! User avatars should be showing up. Attachment and inline images are in the process of being uploaded. We are still looking for a migration path for the Photoplog gallery. Thank you for your patience!
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Husky 7 Bearing replacement

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Husky 7 Bearing replacement

    Hi

    I just bought a used HD husky THD950 wetsaw. Itís in good working condition, almost new, but I anticipate that I will kill it somewhere along the way. I will be using it for at least 3 projects: patio pavers, WFO, and retiling of at least one bathroom in that order. Actually the patio and the WFO will be at the same time. I did a little research and I have a link to a tile forum where one of the posters has figured out how to replace the bearings on the saw. This is a major wear component besides the blade and not that expensive to replace if you know how. Here is the link:
    Ceramic Tile Advice Forums - John Bridge Ceramic Tile - Husky Wet Tile Saw

    Look for the post by antman about ĺ of the way down. Pretty good instructions. I hope it helps you guys.

    Regards
    Larry

  • #2
    Re: Husky 7 Bearing replacement

    Looks like my old MK 470....was a great saw (cut hundreds of tile on many projects over many years)......sorry to say, about 12 firebricks killed it (bearings were going bad prior to the firebricks). Bought the 10" HF saw....a 10" saw makes a world of difference in cutting bricks.

    RT

    Comment


    • #3
      Re: Husky 7 Bearing replacement

      MK's are work horse and depending on how you killed it you can probably fix it. My Porter -Cable 15 yr old router was squeeling like a banshee. just needed new bearings.

      je

      Comment

      Working...
      X