web analytics
Vermicrete - adding Sodium Silicate - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Vermicrete - adding Sodium Silicate

  • Filter
  • Time
  • Show
Clear All
new posts

  • Vermicrete - adding Sodium Silicate

    Just a quick note on an 'experiment' I tried at the weekend.

    I took a standard mix of 2L OPC, 3L Water and 10L of vermiculite and added about 250ml of 75% Sodium silicate solutoin. I used the advised way of mixing the OPC and water first, then added the sodium silicate and finally the vermiculite.

    Within 3 hours the mix had firmed up dramatically, and within 24hrs it had become very firm. This is in contrast to the last lot I made which took 5 days to go off properly, and still didn't completly set up as I would like it.

    Sodium Silicate is used in refractory mixes, and its certainly something I would recommend if anyone has an easy source - obviously, I'd be interested to see how anyone else gets on !



  • #2
    Re: Vermicrete - adding Sodium Silicate

    I used water glass (sodium silicate) in my oven - I used it to make a mouldable insulation mix, because the sodium silicate will withstand much higher temperatures than portland cement, and it sets much quicker than a pure portland mix.

    A couple of my posts on sodium silicate:



    A good link to using it for refractory mixes is here:

    Perlite/silicate composites

    There's a bit more detail on my blog too, on how I used the insulation mix to coat the inside of my chimney to round off some rough edges. I'll be using the same mix to make the door.



    • #3
      Re: Vermicrete - adding Sodium Silicate

      Should have added - I bought my sodium silicate from clayman supplies - link here: Miscellaneous Medias & Materials



      • #4
        Re: Vermicrete - adding Sodium Silicate

        Thanks for the sodium silicate info. I use it for slip casting. That is a thick mixture of clay and water that is solid enogh to pick up in a handful. When you add a small quantity (30 ml or so) of sodium silicate to a bucket full of this slip, once you start to mix it the whole bucket becomes quite liquid like pouring cream, without having to add more water, which is what you want to get rid of into the plaster mould. Magic stuff.
        Kindled with zeal and fired with passion.


        • #5
          Re: Vermicrete - adding Sodium Silicate

          i am intrested in making small moulded articles of vermiculite, can you plz suggest me method to make such article with sodium silicate as binder. after making taking mould out , do we require to heat up the moulded article.