web analytics
Paint in concrete - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 4 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 4 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 4 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
4 of 4 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Paint in concrete

  • Filter
  • Time
  • Show
Clear All
new posts

  • Paint in concrete

    I saw a reference to using paint to color conrete in one of the older posts but no one seems to know if it works or how well. I did find this reference about the effect of a latex paint in concrete.

    The recycling of waste latex paint by using it as a partial replacement for the virgin latex and mixing water in concrete for pavement construction was investigated. In Ontario, Canada, 12% of the total hazardous waste collected by municipalities is waste latex paint, the disposal of which costs Can$0.90-1.40/litre. Typical pavement mixes containing Portland cement, slag, coarse and fine aggregates, air-entraining and water-reducing compounds were prepared in which 25-100% of the virgin latex was replaced by recycled paint. The introduction of recycled paint resulted in improved workability, increased flexural strength, lower chloride ion penetration, and better resistance to surface scaling caused by de-icing salt. The whole of Ontario's waste latex paint could be used for pavement construction.

    Has any tried this yet ? I am curious about the depth of color and the ease of use. The concrete tinting powders are pretty limited in color range and paint might open up other possibilities. ( not everyone wants "Sunset Pink" like George's awesome oven )

    Sharpei Diem.....Seize the wrinkle dog

  • #2
    Re: Paint in concrete

    Just a side note to your quote. New Jersey has had a full-fledged trash crisis for twenty years. It's increasingly difficult to get rid of used latex paint. The answer is simple: when you're done painting, get out the roller, and roll the rest of the paint on the wall. You'll get better coverage, and the empty can can be washed and recycled. A cheap roller cover is less than paying for toxic waste removal the week before you move out of your house.

    As to the concrete tinting question, I don't know. Couldn't you have the local paint store tint the bucket of water you use to mix the final coat of stucco? Skip the expensive latex paint entirely?
    My geodesic oven project: part 1, part 2


    • #3
      Re: Paint in concrete

      Originally posted by dmun View Post
      As to the concrete tinting question, I don't know. Couldn't you have the local paint store tint the bucket of water you use to mix the final coat of stucco? Skip the expensive latex paint entirely?
      I was thinking more or using up the odd gallon or so of paint I having hanging around to dye to concrete countertop I will be pouring. I found some addition information here.


      "As a further note, based on the successes shown in this research, the Ready Mix Industry is also
      indicating that they would be interested in including waste latex paint in further products."

      You can read the entire study from the link. It looks like a mix of about 1 part paint to 9 parts water has some good effects on the concrete. Better details on the surface and a few other things. This makes sense to me as the Cheng concretes for countertops include polymers and latex. The same study proved that adding old paint to asphalt is a bad idea. Since I have no plans to pave my oven with asphalt the point is probably moot .
      I might have to run a few trials to see if there is sufficient pigment with a 10% mix to yield a good color. Since countertops are not "structural" concrete I am more willing to take a chance and try alternative solutions. Has anyone else tried coloring concrete ?
      Sharpei Diem.....Seize the wrinkle dog


      • #4
        Re: Paint in concrete

        The main trouble with colouring concrete with an additive to the mix is that you are working against the grey of the cement, so you end up with a greyish colour. You can overcome this by using white cement, but it is much dearer. It's easier to add a layer over the top which is coloured
        Kindled with zeal and fired with passion.