web analytics
flexy brick sander - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

flexy brick sander

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • flexy brick sander

    Looking for a flexable something to shape and smooth out the mortar application on yesterdays post. The grinding wheel for my angle grinder made for brick is too stiff for the results I was looking for. I bought today one 4" and one 5" 24grit sanding pad I used them both mounted back to back for the flextion I was looking for. Ment for wood but its so coarse it will do the trick (wont last as long as masonary specific products, but nothing out there that is flexable to grind the shape I need). Mounted them as shown (without the rubber backing attachment as its too stiff) and you get a nice flexable edge. It grinds like a hot dangy......wayne

    each sanding pad only cost a $1.29...bonus
    Last edited by waynebergman; 10-18-2007, 08:56 PM.
    see below for my oven album of progress to date

    http://picasaweb.google.com/wayneber...PizzaOvenWorld

  • #2
    Re: flexy brick sander

    Wayne,

    I bought a 6 or 8 inch wheel at Lowes - it was very fexible and did a pretty good job on mortar. It was all purpose, not specific to masonry.

    Les...
    Check out my pictures here:
    http://www.fornobravo.com/forum/f8/les-build-4207.html

    If at first you don't succeed... Skydiving isn't for you.

    Comment


    • #3
      Re: flexy brick sander

      I was wondering how I was gonna get all that mortar off that I left on the inside the other night. I was rudely interrupted by a fall, and I sure left a bunch on the bricks that I had laid....

      Thanks guys!
      My thread:
      http://www.fornobravo.com/forum/f8/d...ress-2476.html
      My costs:
      http://spreadsheets.google.com/pub?k...Xr0fvgxuh4s7Hw
      My pics:
      http://picasaweb.google.com/dawatsonator

      Comment


      • #4
        Re: flexy brick sander

        Looked like a minor fall to me...
        My oven progress -
        http://www.fornobravo.com/forum/f8/c...cina-1227.html
        sigpic

        Comment


        • #5
          Re: flexy brick sander

          Originally posted by christo View Post
          Looked like a minor fall to me...
          quiet christo...............

          but i do need to remove some mortar.
          My thread:
          http://www.fornobravo.com/forum/f8/d...ress-2476.html
          My costs:
          http://spreadsheets.google.com/pub?k...Xr0fvgxuh4s7Hw
          My pics:
          http://picasaweb.google.com/dawatsonator

          Comment

          Working...
          X