web analytics
Planning Guide/Spreadsheet? Cad designs? - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

Forum Issues Update

We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Planning Guide/Spreadsheet? Cad designs?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Planning Guide/Spreadsheet? Cad designs?

    Anyone have (and are willing to share) a planning guide/spreadsheet to help calculate number of blocks/bricks/amount of concrete etc for a standard 42" build? Any cad drawings out there to guide the building? I know there are cad and spreadsheet wizards out there - I have run across some of your amazing tools... I am hoping this thread turns into a collection of the best tools out there...

  • #2
    Re: Planning Guide/Spreadsheet? Cad designs?

    If I recall, we used 78 double blocks for our base, this takes it to 1m high for the door opening.
    Where can I find logs? I need more!
    Finishing the WFO will come after the barn is completed http://flinthousebarn.co.uk/

    Comment


    • #3
      Re: Planning Guide/Spreadsheet? Cad designs?

      I will second this request for CAD file of a 42" build.

      I work with CAD and have started a quick mock up for my own purposes, but unfortunately as it is also my first ever attempt at build I am just guessing most of the dims. etc.

      A sketchup model or CAD with 3D blocks would be awesome.

      Comment

      Working...
      X