web analytics
Best way to finish the dome - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Best way to finish the dome

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Best way to finish the dome

    Hi to everyone on this great forum my name is christian and i live in perth western australia, i have been reading this forum for loooong time, and i really hope someone can help me, im building a 120 cm modular kit WFO on a custom build trailer, now the problem than im stuck is: i build the dome and put two layers insulation with the chicken wire on top, and here is where im finding a lot of questions to answer, first of all should i use vermiculite or not? Second i wsa thinking to finishthe dome with a strong sand finish render mixed of 4.1.1.1 sand,cement,lime,and blue metal dust.
    Now can anyone tell me if its worth it or not and what kind of mix i should do for the vermiculite and how to work (i forgot to tell you im a hardwall plasterer by trade) do i need to mix sand,vermiculite,cement or i dont need the sand, and if so what should i do to make the oven as tough and sturdy as i can.

    I know its a lot of questions but this problem is starting to effect my sleep and i want to do this project right in the first place without having major drama later on the road.
    Thanks very much
    Christian

  • #2
    Re: Best way to finish the dome

    Hi goanzio,
    Im no expert and im sure others will chime in but usually the ceramic blanket gets a layer of a vermiculite mix and then if you can finish it off with render.
    If you have 2 layers of the blanketwhich is probably 50mm, it would not hurt to put another 75mm of a vermiculite mix on top of that.Thats what im about to do with my oven.
    The vermimix should be just vermiculite and ordinary cement(portland).The ratio you use is personal preference.If you want something stronger you would use a 6:1 mix ,ie: 6 parts vermiculite: 1 part cement. If you are going for better insulation you could take the mix all the way up to 10:1.
    Wait for some other responses though.
    Good luck!
    --------------

    John

    My Build ......... http://www.fornobravo.com/forum/f51/...ney-20053.html

    Comment


    • #3
      Re: Best way to finish the dome

      Thanks very much chubbybones and what do you think is better for a wfo on a trailer?and about the last cote of rendering what should i mix? Thanks very much
      Christian

      Comment


      • #4
        Re: Best way to finish the dome

        Hey Christian,
        Im really no expert.This is my first time building a pizza oven which is why i recommend you wait for some other guys to give their opinions before you proceed.Being on a trailer may require even more support/reinforcement if you're going to be driving it around.

        I guess another option would be to use 4 layers of the ceramic blanket, put some chicken wire over that and then use your render mix.100mm of ceramic fibre blanket is more than enough insulation.
        Your render mix seems pretty good to me and a lot cheaper than buying premixed render from bunnings.

        Regards John.
        --------------

        John

        My Build ......... http://www.fornobravo.com/forum/f51/...ney-20053.html

        Comment


        • #5
          Re: Best way to finish the dome

          Hi Goanzio
          I'm no expert either, but here's what I did 50mm (2 x 25mm) ceramic blanket and then 50mm perlite render.
          Exfoliators Litefill Premium Perlite and Brightonlite HE cement @ 5:1
          Used 50mm corrugated conduit as a gauge for applying render.
          Will finish with Drypak RenderCoat approx 5 - 8mm thick.
          See my build
          Attached Files
          Liteceeper
          ~~~~~~~
          My Build - http://www.fornobravo.com/forum/f51/...ide-19729.html
          My Door - http://www.fornobravo.com/forum/9/sh...tml#post170496

          "Not everything that can be counted counts, and not everything that counts can be counted." - Albert Einstein

          Comment

          Working...
          X