web analytics
Mold creation for castable refractory - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
3 of 3 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Mold creation for castable refractory

  • Filter
  • Time
  • Show
Clear All
new posts

  • Mold creation for castable refractory

    I'm new to the forum and a DIY pizza and bread fan and a WFO is on my wish list, but first I want to do some experimentation with castable refractory. From reading the DIY examples in the forum, it looks like there may be various ways to work with it, like piling thick refractory on top of a sand dome or pouring it into a styrofoam mold. I would like to experiment with making a mold to create some pieces to experiment with.

    Is there a good or standard way to create a mold? Plaster? Sand? Some sort of foam? Without bothering you with too much detail, I'll just say I'm not creating a dome or anything specific right now. Just considering a design for a different sort of oven and want to make some casted pieces.

    Regards . . .