web analytics
What NOT to do when building the wall - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >

Forum Issues Update

We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

What NOT to do when building the wall

  • Filter
  • Time
  • Show
Clear All
new posts

  • What NOT to do when building the wall

    Never place anything smaller than the block cavity hole on the edge of an unfilled cavity unless you have someone handy who has really long and skinny arms who can reach down and retrieve it.

    Good bye, trusty tape measure. You have served me well.
    Attached Files

  • #2
    Re: What NOT to do when building the wall

    Unless it was a fat-max..then you should knock a hole through the cell and get it.
    Old World Stone & Garden

    Current WFO build - Dry Stone Base & Gothic Vault

    When we build, let us think that we build for ever.
    John Ruskin


    • #3
      Re: What NOT to do when building the wall

      That just means that you are not drinking enough beer. Those cells should be full of empties.


      • #4
        Re: What NOT to do when building the wall

        Tape measures are the best tool ever invented to fish out tape measures.That's why they put that thing that looks like a belt clip on them.Now if they would just put a GPS location device on them.



        • #5
          Re: What NOT to do when building the wall

          Get yourself a good rare earth magnet on a long pole or cord and retrieve it.
          I do this all the time, in fact some automotive spare parts outlets sell them on telescopic wands.
          You will need to attach it to the metal end tang but a good magnet should attract the metal tape through a plastic body.
          Prevention is better than cure, - do it right the first time!

          The more I learn, the more I realise how little I know

          Neillís Pompeiii #1
          Neillís kitchen underway