web analytics
Quick way to bend rebar - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Quick way to bend rebar

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Quick way to bend rebar

    Hello there!

    I needed 18 mm rebar bent into a sort of stirrups to tie concrete block stand walls together so I rigged up a quick bending set: I drilled twin holes in a tree stump 2 m from the forno site using a hand brace and 19mm spade drill, then plonked down two bits of steel, one a chisel, to act as stops. (On my first attempt at bending the rebar rod, I bent the first set of steel 'stops' instead and had a quick tumble.)

    The resulting bent rod - one of a dozen - is shown in the second snap. Third snap shows the arrangement of the first few 'ties' in place on the stand.

    Cheers,

    Carioca
    Last edited by carioca; 02-20-2007, 09:36 PM. Reason: correct dia. of reo
    "I started out with nothing, and I've still got most of it"

  • #2
    Re: Quick way to bend rebar

    Aussie ingenuity reminds me some similar easy solutions I saw in Kiwiland

    Comment


    • #3
      Re: Quick way to bend rebar

      Carioca,

      I did something similar for "staples" from the rebar grid of my foundation into the Sono Tubes underneath it. Started with a large machinist's vise. Didn't work. Ended up using the bumper of an older Ford F150. Voila.

      Jim
      "Made are tools, and born are hands"--William Blake, 1757-1827

      Comment

      Working...
      X