web analytics
Placing a Primavera 70 - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Placing a Primavera 70

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Placing a Primavera 70

    I'm pretty excited. The counter tops go on the outdoor kitchen next Wednesday and my FB Primavera 70 arrived yesterday. The delivery man was able to move the crate directly into the back of my pickup. I can drive the whole thing back to within 15 feet of the final resting spot. Has anyone figured out the best way to move these ovens? I can enlist friends with healthy backs and appetites but I'm concerned with being able to position the oven right were it needs to go on a granite countertop. It seems like once it's put down it will be hard to move again without damaging the granite. I've been considering using 2x4s for the move from crate to countertop and then using shims or dowels or furniture moving pads to move the oven around on the counter top. Any ideas?

  • #2
    Re: Placing a Primavera 70

    Hello,
    We are dealers in the North East. We have found the beast way to place the Primavera Oven. These photos will show you how with only two men or woman. Just click here. PRIMAVER INSTALL PHOTOS
    If we can be of any further help, please advise.
    Best Regards,
    George J McNeil

    Comment


    • #3
      Re: Placing a Primavera 70

      Thanks for the help George. We ended up using a shooting boom forklift to drive the oven to the back and over the patio to the outdoor kitchen. The biggest question we had was how to remove the lifting straps once the oven was resting on the countertop. My son came up with a really cool way to do just that. I put descriptions and photos on the Outdoor Kitchen design/build tread.

      http://www.fornobravo.com/forum/f35/...tml#post152018

      Comment

      Working...
      X