web analytics
Angleizer free Windows Software - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

Forum Issues Update

We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Angleizer free Windows Software

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Angleizer free Windows Software

    General tools has a product called Angleizer that has been mentioned on this site previously. Available from their website is a free Windows software program that can be used to calculate brick cuts for Bullseye, Semi Circular Arch and Axed Arch. The software can be downloaded from the following link.

    General Tools and Instruments

    Select download button on that page and download the zip file. The file will need to be unzipped to a location of your choosing and you will need to run the autorun.exe program to start the software. The software is pretty easy to use. May be helpful to some users wishing to calculate number of bricks needed for a run and bevel cuts. A couple of screen shot examples are attached of how the software looks.

    Manny
    Attached Files
    Last edited by u863583; 06-22-2012, 06:55 AM.

  • #2
    Re: Angleizer free Windows Software

    thanks for the great tip. i will get one of those this weekend.

    Comment

    Working...
    X