web analytics
deocrative top of dome. - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 4 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 4 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 4 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
4 of 4 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

deocrative top of dome.

  • Filter
  • Time
  • Show
Clear All
new posts

  • deocrative top of dome.

    I would like to make a custom decorative inside top brick to my dome from clay and fire it in a kiln before installing it.
    I was thinking of may a sun with a face. I know it would only be visible from inside but I still think it would be cool.
    Something similar to this picture I found on the net.
    If anyone has done someting like this, can you give me any tips?
    Would it stick if I just use the mortar and stick it to the top inside of the finished dome?

    Last edited by gtofani; 10-26-2011, 10:40 AM.

  • #2
    Re: deocrative top of dome.

    I think it will probably fall off and you'll end up with some extra toppings on your pizza. The top of the dome is the hottest and is subject to the most rapid rate of temp rise.If I were to tackle tis idea, and I think it's a good one, I'd carve the design into a slab of plaster of Paris and press soft clay into it, then form a thick slab behind it which can be trimmed after firing. I think the placement would also be better if you put it on the back of the oven about half way up. It would be more visible there. Expect about 10% shrinkage from the plastic state to finished fired product. Use a clay with plenty of grog and good thermal shock characteristics. Ask a local potter.
    Kindled with zeal and fired with passion.


    • #3
      Re: deocrative top of dome.

      I already made the sun face today as a demo for my students.( I teach art at a high school) The clay is cone 5 clay which fires at around 1870 degrees.
      Well above the wood oven temperatures.
      I like the idea of placing it on the back oposite the entrance, that way I can see it all the time.
      Another thought was to place it on the decorative arch on the front of the oven. I will post pics when I get it done.


      • #4
        Re: deocrative top of dome.

        It would be really cool to watch it turn black when you first start the oven, then slowly heat up and burn clean as the oven reaches full temp. I like the idea of the back of the oven as well...

        Keep us posted with pics!
        Ken H. - Kentucky
        42" Pompeii

        Pompeii Oven Construction Video Updated!

        Oven Thread ... Enclosure Thread
        Cost Spreadsheet ... Picasa Web Album


        • #5
          Re: deocrative top of dome.

          I had a sun face made out of clay, I got in a hurry and placed it in the kiln, only to help dry it a little, well, if you forget about it and dont shut off the kiln, the temperature goes up very fast and it is now in a million pieces.
          No problem, I will just start another one.