web analytics
fire rock mortar - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

fire rock mortar

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • fire rock mortar

    hello everyone, helping a friend on his build, he purchased mortar for his build,48'' rnd. oven, its called firerock polymer modified mortar, purchased at a fireplace supply house was told its good to 2000f, I'm unsure of the polymer content, is it safe for food cooking?.

    thanks for your input

    Phil

  • #2
    Re: fire rock mortar

    Phil,

    The best way to check the stuff out is to get a Material Safety Data Sheet (MSDS) and any product literature you can put your hands on. Give it a read and if you cannot figure out what is says (Caution: May have regulatory gobbly gook) send me a copy or link and I can translate - I approve chemicals at the site I work at.

    My only concern from your post is that it has polymer at all! Typically, most polymers like to degrade in the area of 400 F plus or minus a hundred or so degrees - just the nature of the beast because of the carbon content. The polymer does allow for easier working (usually) or controlled flow properties (Tscarborough sells concrete and masonry products and has a better handle on this than I - I just spec the stuff now )

    Does the stuff purchased have some sort or warranty against failure?

    CW
    Jen-Aire 5 burner propane grill/Char Broil Smoker

    Follow my build Chris' WFO

    Comment


    • #3
      Re: fire rock mortar

      hello c5dad, thanks for your response, the specs have no info on degrees tolorance, that is what worries me, don't want to finish the dome and have it collapse upon firing at high temp. but I'm thinking that it could be a plus for the ease of building of the dome, less time waiting for mortar to dry,to apply other bricks, not a lot of braces needed, of course the bricks must be fitted and cut very snug for the dome to support itself after the polymer breaks down at high heat, just worried about food contamination,he was told at the fire place supply house, they use it for building fire places and its good to 2000F, I'm just not sure that's true,it is not stated on the bags,sales people will say anything for a sale, even if they are not sure of it.

      well thanks for the info on Tscarborough I will check them out


      Phil
      Last edited by MAVANO; 09-05-2011, 10:51 PM.

      Comment


      • #4
        Re: fire rock mortar

        I could not find an MSDS or any information on the Fire Rock Mortar, but going by the installation instructions, I would not use it for anything but a Fire Rock fireplace. It states that it is an adhesive, not a mortar, and that is enough for me to say that using it for anything other than gluing together Fire Rock fireplace sections is not advisable.

        Comment


        • #5
          Re: fire rock mortar

          thank you for your response , my thoughts exactly, for fireplaces only,well I'll try to convince my friend of it,

          thanks again

          Comment

          Working...
          X