web analytics
essential tool.. dome guage - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

essential tool.. dome guage

  • Filter
  • Time
  • Show
Clear All
new posts

  • essential tool.. dome guage

    Making a 42" diam oven, want the max height of dome to be 18". Therefore I need a variable length guage starting at 21" and gradually reducing 3" to 18". I have seen the pictures; do not have a welder; how do i attach an adjustable bolt ( 3") to the arm (wood)? any plans for making this tool? I plan to pivot the arm on a hinge. Any problems with that?
    thank you,
    Victor C

  • #2
    Re: essential tool.. dome guage

    Hi Victorsee,

    I used a hinge and a piece of all-thread rod for my I.T. Look at photos of oven #2. View as a "slide show". You will see several photos of the tool in the oven. You'll get an idea from that.


    Here is the link to my oven number 1 construction photos!

    Here is the link to my oven number 2 construction photos!


    • #3
      Re: essential tool.. dome guage

      I used a castor and removed the wheel and drilled out a new pivot point. Then attached all thread to a turn buckle. I don't know if you will get 3 inches, but you could use 2 turn buckles. You can see pictures in mu build thread at: http://www.fornobravo.com/forum/f8/3...tml#post116854

      Hope that helps.



      • #4
        Re: essential tool.. dome guage

        Chris and Bob, both creatove and simple ideas... even i might be able to replicate! This is fun, your help much appreciated,
        Victor C