web analytics
Ceramic Fibre Board - does it have to be dry? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Ceramic Fibre Board - does it have to be dry?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Ceramic Fibre Board - does it have to be dry?

    Hi Everybody!

    Like most of you builders and posters, I have been watching the forum for quite a while and, indeed, am quite a way with the progression of my oven.I have decided to take the plunge and join this fantastic resource and take adavantage of the wealth of knowledge and expertise out there. I'd also like to share my experiences and contribute as well and am just working out how to link up my oven blog site to this forum so I can share my experiences so far.

    I live in Cumbria in the UK. It is very wet here. I have just managed to buy a whole load of new kit including some ceramic fibreboard...FB UK were out of stock so I managed to source somnething similar here in the UK. I have also bought a brick cutter and a load of sparkling new firebricks to lay my floor with.

    I have read that one should not only lay the floor onto the board but the dome as well, and I understand the reasons for that. My worry is that with time being not in very plentiful supply for me, if I lay the brick floor and leave the edges of the board exposed to the elements, inevitably, it will soak up some of the rain even if protected. The question I want to ask is ..."does that really matter?". Will any water that gets soaked in evaporate when it gets lit? Should I worry too much about this issue and just get on with it? This is what is suspect the answer will be!

    I'd be very grateful to hear from any of you who have any thoughts on this issue.

    Many thanks,