web analytics
Need help with HF saw - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Need help with HF saw

  • Filter
  • Time
  • Show
Clear All
new posts

  • Need help with HF saw

    Hope everyone is enjoying the end of summer and the beautiful evenings that go with it.

    I went out today to try my hand at tapering a brick for my hemispherical inner arch and found what I had suspected all along: after hundreds of cuts in putting my patio pavers in, my HF saw is out of alignment. Not only is the bottom of the blade tilting in toward the post, the path of the blade gets wider to the right as I push a brick in towards the saw.

    I pulled out the allen adjusting screw on the horizontal shaft and tapped the motor assembly in with a rubber mallet, but after tightening there is still a ton of play in the shaft. I can manually push and hold the motor (and blade) back into vertical, but it won't stay there when I let go.

    Humbly asking for any advice in getting my saw back in alignment.


  • #2
    Re: Need help with HF saw

    Hey John!
    Here is a link to JCG31's info on the HF10. Let us know how it turns out.



    • #3
      Re: Need help with HF saw


      Thanks a bunch! I'm on it. I had attempted a FB site search (and Google) using words like Harbor Freight, HF, alignment, etc, to no avail. After seeing jcg31's post I searched using the words blade + alignment, and voila!