web analytics
High Heat adhesive? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >

Forum Issues Update

We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

High Heat adhesive?

  • Filter
  • Time
  • Show
Clear All
new posts

  • High Heat adhesive?

    Does anyone know of a high heat adhesive that I could use to construct my door? It will be made out of a jigsaw puzzle of insulating firebrick.


  • #2
    Re: High Heat adhesive?

    Pure silicone is good to around 500 degrees. Things like J-B weld maybe?


    • #3
      Re: High Heat adhesive?


      About what temperature are you at when you lock up your oven for a overnight slow cook?

      Less than 500 F?


      • #4
        Re: High Heat adhesive?

        Way down there around 250 max to start, but I put the door on after the last pizza is done, above 800 degrees.


        • #5
          Re: High Heat adhesive?

          You can try it, but I think that an adhesive solution may be hard to achieve. There is a lot of expansion/contraction involved. I would try for some sort of mechanical solution.