web analytics
Stucco Over Angle Iron - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Stucco Over Angle Iron

  • Filter
  • Time
  • Show
Clear All
new posts

  • Stucco Over Angle Iron

    I have finished installing my oven and I am about to apply a stucco finish to both the oven and the stand. I have constructed the stand out of cinder blocks (as instructed in the FB oven installation manuals) and have used 2" angle iron to support the blocks over the opening for wood storage.

    I imagine applying the stucco directly over the exposed metal angle iron will be a problem, as I am concerned that it will not adhere properly. Does anyone have any recommendations here?

  • #2
    Re: Stucco Over Angle Iron

    You will need to apply lath over that area, and lap it well onto the CMU.


    • #3
      Re: Stucco Over Angle Iron


      Thanks for the reply. Any recommendations for affixing the lathe over the angle iron/ CMU?

      Much appreciated.


      • #4
        Re: Stucco Over Angle Iron

        Concrete nails into the joints.


        • #5
          Re: Stucco Over Angle Iron

          Ahhh...perfect. Thanks again


          • #6
            Re: Stucco Over Angle Iron

            Originally posted by Anders View Post

            Concrete Masonry Unit (your blocks)

            Check out my pictures here:

            If at first you don't succeed... Skydiving isn't for you.