web analytics
Using foam as a core for vent adaptor - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

Forum Issues Update

We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Using foam as a core for vent adaptor

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Using foam as a core for vent adaptor

    To make a gentler transition from square to round (in order to adapt to the Duratech pipe) I made this foam core and shaped it with hand tools to the desired form. I set in in snug in the square vent hole and poured the vent/flue around it, then set the adapter plate into the wet cement. When the cement had cured, I pushed the core down out of the vent, and attached the chimney. I don't know if all this trouble was worth it, but my oven leaks absolutely no smoke into the house. The draft seems perfect.
    Attached Files
Working...
X