web analytics
Fire bricks - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Fire bricks

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fire bricks

    Hi guys!!!

    I have a question, I want install firebricks , but I want to take them out easy, and use them again, in a new concrete slab in the future ( the slab have a crack, but I want to use it, the longest I can The slab fell down, when installing it.
    ).

    So may be a mortar with less portland, or sand and the firebricks on the top with mortar on the joints or no mortar. ??????

    The dome is already done, and I can remove out all the dome easy, is not atched to the floor. So is not a problem.

    Thanks for the advices
    Walt

  • #2
    Re: Fire bricks

    I am a Ceramic Engineer with over 15 years field experience working 100% in the field.

    I would not use any mortar at all for the floor brick. Period. This is what I did for the floor of my wood fired oven and there are no problems.

    As a matter of fact, you will be building up small fires at the start to cure the oven. The ashes left over from these fires can be swept out. That will actually push some ash into the joints between brick filling those joints up. The mortar is not needed to 'glue' the brick together - they certainly can't fall anywhere. Additionally, if a floor brick does actually break or shift a little so the floor is no longer as smooth as you like you will be able to take them out and shift them around or replace them.

    Comment


    • #3
      Re: Fire bricks

      Yeah, no need to mortar the floor, the very fine ash from from the fires will easily fill in the tightest of cracks. Plus, by not mortaring the floor you can replace chipped or damaged floor bricks, as unlikely as that is.

      Website: http://keithwiley.com
      WFO Webpage: http://keithwiley.com/brickPizzaOven.shtml
      Thread: http://www.fornobravo.com/forum/f21/...ttle-7878.html

      Comment


      • #4
        Re: Fire bricks

        Thanks guys for the help,

        I put the bricks, lying close to each other, or leave a space of 1 / 8 or 1 / 4 between them for the ashes.

        The extreme heat can cause the bricks to expand, and break or crack, if they are really tight each other.?

        Thanks
        Walt

        Comment


        • #5
          Re: Fire bricks

          Brick are at their smallest fresh from the kiln and increase in size throughout their life, although the amount taken individually is extremely small. Concrete on the other hand, is at it's greatest size when new and shrinks throughout it's life, although it is also a small amount.

          Comment


          • #6
            Re: Fire bricks

            "I put the bricks, lying close to each other, or leave a space of 1 / 8 or 1 / 4 between them for the ashes. "

            Set them tight to each other. They don't expand enough to worry about.

            Comment


            • #7
              Re: Fire bricks

              My apology for not getting a reply back to you faster.

              There is no need to put any gap between the bricks for your floor.

              Generally, for firebrick the thinner the joint the better. Especially for a floor that is laid 'dry' (i.e. without mortar). That statement about joint thickness has one caveat: It assumes that a true refractory mortar is being used.

              Comment

              Working...
              X