If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
1 of 4<>
Forum Page Loading Response
We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 4<>
Hello, Forno Bravo Community Forum members.
As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.
We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:
The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.
Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.
We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.
Thank you for all of your patience and continued support.
For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.
I received it before I started my slab or stand and held it for 5 months before I started using it. Why don't I see what the response is, if somebody wants it who has their foundation and stand built, then maybe you can get it from them, otherwise you are first in line.
My stand and insulation are complete. I have some patio paving to finish up, but will be embarking on my oven very shortly. If your indespensible tool is still available, I'd be honored to 'borrow' it and forward it on when I'm done.
since you are just about ready to start on the dome you are the winner of the indispensable tool sweepstakes. I also have some very nice arch forms if you are planning on semicircular arch opening. We added 1x1 slats to the inner arch form to use the same form for the outer arch. You can look at my build thread to see them.
Metalman in Mississippi asked about the tool too, so when you are done with it check with him first to see if he is ready to use it. PM me with your address and I will ship it up, unless you are going to be in SD area in the next couple of weeks.
I humbly accept your offer and would love to deploy such an experienced tool on my build! I have a college student who lives with us and is planning to visit her folks in downtown San Diego weekend after next. If she is able to make the trip I will ask her to stop by and pick up the indispensable tool and the semicircular arch form. Funny, I was giving this style of arch (different from my original design) serious consideration after seeing your and Kebwi's results, and now I'm sure I will make the change. If she cannot, maybe I can send you a check to cover the shipping.
The tool has been passed to Gianni Focaccia. This particular tool was made by Jim Gleim for the person who gave it to me. He may be willing to make you one,I think he is about to make a second oven( he moved). Send him a private message (jcg31).While you are at it check out his oven cam on his build thread, it is cool.
I'd hate to see someone's oven build potentially be put on hold for weeks simply due to not having the I-tool.
While the clamping assembly of the I-tool is totally ingenious and makes brick laying very easy, putting together the tool itself gets a bit more involved than constructing a much simpler I-tool without the clamp. I noticed a good majority of the builders who built their own I-tool didn't use the clamp assembly, including myself.
My crude looking I-tool gave me a nice round dome. If you wedge your bricks they will stay put after a couple of minutes. You can then remove the I-tool from that brick and move on to the next brick.
The simplest looking I-tool I saw belonged to Eric's Minnesota Insanity oven build. If I were to build another oven I would make my I-tool similar to his. I would simply use one long threaded rod with a large tension nut on the brick end. The other end will pivot on a piece of plywood. The pivot end could be as simple as drilling a large hole in the plywood and simply letting the threaded rod pivot within the hole itself. Nice thing about this is that the rod pivots at the oven floor level. This I-tool would consist of just 3 parts.....threaded rod, tension nut, and plywood.