web analytics
Soldier angle cut - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Soldier angle cut

  • Filter
  • Time
  • Show
Clear All
new posts

  • Soldier angle cut

    Just about to lay in the floor for my 36" Pompeii. I plan to do a internal floor with vertical soldiers. Two questions. 1. What angle to cut the tops of the soldiers? 2. With the internal floor my brick saw obviously cuts straight angles not curves, do i fill in with fireclay/sand/lime/portland mortar, just fireclay and sand or other? I guess the fireclay bog question is also relevent to the top of the dome as well where the guide pdf shows a fair bit of mortar between the bricks.

  • #2
    Re: Soldier angle cut

    1. What angle to cut the tops of the soldiers?
    1) Set brick upright on insulation, in position.
    2) Stretch string from center of floor to desired height of soldier.
    3) Mark string angle. Cut and repeat.

    do i fill in with fireclay/sand/lime/portland mortar, just fireclay and sand or other?
    I vote for filling that gap with wood ash.
    My geodesic oven project: part 1, part 2


    • #3
      Re: Soldier angle cut

      "I vote for filling that gap with wood ash."

      Or have the hearth bricks go under the soldiers.