web analytics
Firebrick Hearth Uneven - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Firebrick Hearth Uneven

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Firebrick Hearth Uneven

    Hi folks. It's been a while since I have posted on the site. My oven was completed last summer. It's been over a year now of enjoyment with pizza's and breads.

    I noticed the other day when I fired it up that some (2) of the bricks just inside the entry way and to the left are not even. My rake and peel catch the edge. I do not remember this being the case when I built it. So my suspicion is that this has developed over the last year or so. I am built on the fibre board (2" thick as I recall).

    Is it possible the fibre board has compressed and has caused this to happen?

    Post #14 in my thread shows the picture:

    http://www.fornobravo.com/forum/8/to...ld-4678-2.html

    Should I worry about this?
    Check out my build at:
    http://www.fornobravo.com/forum/f8/t...uild-4678.html

  • #2
    Re: Firebrick Hearth Uneven

    "My rake and peel catch the edge."

    If you have an angle grider, just trim the edges back a bit.

    "Should I worry about this?"

    Not unless there is some sort of structural failure (examine your suspended slab closely for cracking.)

    Comment

    Working...
    X