web analytics
Scrap Insulation Board - reuse/recycle? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Scrap Insulation Board - reuse/recycle?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Scrap Insulation Board - reuse/recycle?

    I've cut out my FB insulation boards and have some big scraps left over. I noticed some threads of larger ovens who felt they were a little short with using 3 full FB boards. If anybody is in that boat, I'd be more than willing to ship out my scraps. Otherwise, does anyone know what the best way to recycle or dispose of this stuff properly?

    All boxed up and ready to ship out.
    Attached Files

  • #2
    Re: Scrap Insulation Board - reuse/recycle?

    Did you save enough to make a door ?


    • #3
      Re: Scrap Insulation Board - reuse/recycle?

      I agree, definitely save enough for a door (or two) If no one takes you up on your generous offer, consider using it to insulate your flue. I used a few small pieces cut in half through the thickness (with a hand ripsaw) around the upper part of the flue where I ran out of insulation blanket. The rest of the scraps just got thrown in with the loose vermiculite fill insulation. So I know where to find some if I ever need it, I didn't want to just throw it away.



      • #4
        Re: Scrap Insulation Board - reuse/recycle?

        I was going to go with a stainless flue.

        I'm not sure what I'm doing for the door, but I'm leaning toward a thinner door and not having to encapsulate this ceramic foam. Has anyone used this in a door sandwich?

        Its already boxed and I'm willing to ship it. The FB forum users have been more than generous with their time that I figure if someone can make use of it - all the better.