web analytics
Cheap Angle iron.... - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Cheap Angle iron....

  • Filter
  • Time
  • Show
Clear All
new posts

  • Cheap Angle iron....

    Found a very cheap source for angle iron.... bed frames.

    You can find them all over at garage sales, usually just for a couple of bucks.

  • #2
    Re: Cheap Angle iron....

    Good tip Spunkoid.


    • #3
      Re: Cheap Angle iron....

      Doh. I have three of these in my garage for some reason, and yet I paid $20 each for two angle irons when I was building my oven. Brilliant!


      • #4
        Re: Cheap Angle iron....

        Yep. I used one that I had laying around the house and then patted myself on the back for recycling


        • #5
          Re: Cheap Angle iron....

          I ended up using a caster for the mounting point of the indespensable tool. Although I bought mine for the significant sum of $1.35, some of the bed frames come with casters.