web analytics
Concrete curing time - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Concrete curing time

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Concrete curing time

    Hello,
    I built my stand and poured the concrete hearth this past weekend. I covered the wet slab with burlap to keep it moist overnight and in the morning I found some of the portland cement had coated the surface of the concrete, maybe a total of a cup for the entire slab. I assume the burlap helped wick this. The slab seems solid but how do I tell? Also, how long should I let it cure before I start with the insulating layer of portland and perlite?

  • #2
    Re: Concrete curing time

    Don't worry about the surface of your concrete slab. Concrete will cure underwater. How do you think they build bridges? As long as it's the right thickness and properly reinforced you are good to go. You can place your vermiculite concrete right away: at one point it was suggested to pour the support slab and the insulating layer one right after another. You should let your concrete cure for a week before proceeding with your floor and dome.
    My geodesic oven project: part 1, part 2

    Comment


    • #3
      Re: Concrete curing time

      I agree. Keep it wet for a week.

      Comment


      • #4
        Re: Concrete curing time

        You mean letting the portland and perlite mixture wet cure for a week? Thanks

        Comment


        • #5
          Re: Concrete curing time

          I would: it takes a while to solidify into the cork-like consistency you're looking
          My geodesic oven project: part 1, part 2

          Comment


          • #6
            Re: Concrete curing time

            Originally posted by dmun View Post
            I would: it takes a while to solidify into the cork-like consistency you're looking
            Okay, that's good. One more question: The 5 parts Perlite to 1 part Portland Cement, that's by volume correct? Once poured do I just screed the mixture level or should I try and float it flat like the concrete?

            Thanks

            Comment


            • #7
              Re: Concrete curing time

              The 5 parts Perlite to 1 part Portland Cement, that's by volume correct? Once poured do I just screed the mixture level or should I try and float it flat like the concrete?
              Yes, by volume, mix the dry ingredients until fully coated then add water until just wet.

              You won't be able to float this mixture, the best you're going to be able to do is pat it flat on top with your trowel.
              My geodesic oven project: part 1, part 2

              Comment


              • #8
                Re: Concrete curing time

                I found some of the portland cement had coated the surface of the concrete
                This is typically something you will experience if your concrete is on the wet side. In serious cases it could weaken the concrete due to depletion of cement, but for such small structures and dimensions we are talking about here there is nothing to worry about.

                regards from Karl

                Comment


                • #9
                  Re: Concrete curing time

                  Thanks for all the answers

                  Comment

                  Working...
                  X