web analytics
Vent to small - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Vent to small

  • Filter
  • Time
  • Show
Clear All
new posts

  • Vent to small

    So what is the downside of having a vent to small?
    I had some help this weekend that turned out to be more work. I had to leave at the end of the day and my help thought that they would help and bought a vent pipe from HD. Then filled up my 8” hole with ref mix and put the double wall 5” vented pipe in. So now that it is only the opening in the arch I could cut it out back to the 8” but it is going to be a lot of work. To top it off they mixed my SS needles in with the mix to help hold the ref in place???
    So what should I do (other than shot the help)?
    Thanks for the help….
    Last edited by Cypress; 06-01-2009, 12:32 PM. Reason: pic

  • #2
    Re: Vent to small

    Well I guess that I am lucky sometimes. I got home and was able to pull the vent right out. When I looked at the inside of the arch it looked good. They used the bricks that I had cut so it still was angled perfect and the opening was 8” jus filled in with fire rock. Was able to knock out the extra and now back to the 8” opening for the vent. I will get the right vent and move on.


    • #3
      Re: Vent to small

      If you want it done right....do it yourself huh? Glad to hear you were able to recover...
      My Oven Thread: