web analytics
Do I need the angle iron? - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Do I need the angle iron?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Do I need the angle iron?

    I'm building a corner design WFO. Do I need to put the angle iron across the front. Since it is only 26" across do I really need the angle iron across. From the pictures on the web it seems that that people are pouring the hearth and letting it span across the block with no support.

  • #2
    Re: Do I need the angle iron?

    You do need some support, but you can get it by putting a few extra pieces of rebar into the support slab above the unsupported span. You also don't particularly need that row of blocks above the wood storage door, that the angle iron supports. That always seemed to me to be just something to hit your head on when you're retrieving the firewood from the back.
    My geodesic oven project: part 1, part 2


    • #3
      Re: Do I need the angle iron?

      thanks I figured that just wanted confirmation since I'm at that level of block