web analytics
Construction material scraps - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Construction material scraps

  • Filter
  • Time
  • Show
Clear All
new posts

  • Construction material scraps

    I'm getting ready to start curing my oven. I know when cooking, it's recommended to use hard wood. How about during the curing process? Will it be OK to burn up some scraps of 2x4, etc from the construction process, or will that stink up my oven. I have a lot of that stuff to get rid of.
    Mike - Saginaw, MI

    Picasa Web Album
    My oven build thread

  • #2
    Re: Construction material scraps

    That should be just fine.
    Just don't used any treated lumber.
    Toxic fumes with them.
    My thread:
    My costs:
    My pics:


    • #3
      Re: Construction material scraps

      How about plywood?
      Mike - Saginaw, MI

      Picasa Web Album
      My oven build thread


      • #4
        Re: Construction material scraps

        Just be a little selective as to what you burn in your oven for toxic fumes and residues, but a little ply should not cause any harm.
        I would not use much (if any) 'marine' or 'industrial ply' as it 'waterproof' and has a 2 pack adhesive which 'could be harmful' when burnt. If you have a ready supply and would like to use it, then contact the manufacturer for additional information. They must by law have MSDS sheets (material safety data sheets) explaining their products and safety issues etc.

        Prevention is better than cure, - do it right the first time!

        The more I learn, the more I realise how little I know

        Neillís Pompeiii #1
        Neillís kitchen underway