web analytics
wood shims or door stoppers? - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

wood shims or door stoppers?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • wood shims or door stoppers?

    Hi, fellow builders!
    In a few days i will begin to build the dome and since cutting shims
    seems the only way to go ,Iwas wondering if anyone had become
    a bit more inventive and used something else like rubber door stoppers
    would that work? they are rather inexpensive around here (Kobe) .
    Thanks for your kind reply in advance.

  • #2
    Re: wood shims or door stoppers?

    I wouldn't bother with that. I bought a piece of 3 x 1 poplar wood to use as a screed (since it's nice and straight) when I was laying concrete. I cut my wedges out of that. It was really easy and probably cost about the same as one rubber door stopper, for 15 or 20 wedges. By the way, I only used the wedges to help set the initial angle, after that I used the pie shaped wood form and just eyeballed it.
    Check out my oven progress here: http://www.fornobravo.com/forum/phot...dex.php?u=4147

    See ALL of my pictures here:
    http://picasaweb.google.com/Brevenc/...OutdoorKitchen

    Comment


    • #3
      Re: wood shims or door stoppers?

      I put pebbles and bits of left over firebrick in the gaps to get the right angle, the advantage being you don't have to remove them once you've mortared the brick down.

      For shims I'd say whatever works. I think Doorstoppers should work very well.
      "Building a Brick oven is the most fun anyone can have by themselves." (Terry Pratchett... slightly amended)

      http://www.fornobravo.com/forum/f8/p...pics-2610.html
      http://www.fornobravo.com/forum/f9/p...nues-2991.html

      Comment


      • #4
        Re: wood shims or door stoppers?

        I like Frances' idea of using stones, pebbles or brick remnants as shims.

        I used scrap brick pieces for my shims - I had so many from all the cutting I did.

        It's a real bonus not to have to remove them later.

        Christo
        My oven progress -
        http://www.fornobravo.com/forum/f8/c...cina-1227.html
        sigpic

        Comment

        Working...
        X