web analytics
Expanded clay insulation OK ? - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Expanded clay insulation OK ?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Expanded clay insulation OK ?

    As I mentioned in my build thread, I ran short of vermiculite when pouring the under-hearth insulation layer, so made sure the edges were level where the dome needs support and just left a small depression in the centre to fill later.

    Unfortunately I was unable to source any more vermiculite and all the builders merchants are now closed for 2 weeks, so instead I bought a bag of "Expanded Clay" (see attached photo) which I was told would be suitable.

    These are very light but hard irregular granules averaging about half an inch in diameter. I mixed them in a similar way to vermicucrete and poured them into depression. They were quite hard to level having such big chunks, but I left them below the level required and then finished off with a thin skim of concrete that the firebrick base will rest on.

    Although this was not ideal for the base, it would be very easy to slap on in handfuls to insulate the dome, but I wondered if anyone had any experience of using this material and knew its insulation properties ?

    Thanks in advance for any help Roger
    Attached Files

  • #2
    Re: Expanded clay insulation OK ?

    As far as I know you're on fairly new ground there. I think Dvonk used something similar, there's some discussion of it on this thread:


    Have you tried heating up that chunk you've got there? Hold a blow torch to it and see how far the heat spreads.
    "Building a Brick oven is the most fun anyone can have by themselves." (Terry Pratchett... slightly amended)



    • #3
      Re: Expanded clay insulation OK ?

      Thanks for that link Frances. I had done a search for "expanded clay" but it came up with nothing, so it must have been my "typink skils" again

      I'll give it a try with a blow-torch, nice idea !

      Ciao Rog


      • #4
        Re: Expanded clay insulation OK ?

        That's some interesting-looking stuff there. How did the blowtorch test go?



        • #5
          Re: Expanded clay insulation OK ?

          Haven't done the blow-torch test yet, priority today was getting other stuff done - see my other thread which will be updated with today's progress in a few minutes...