web analytics
Cutting Isol - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Cutting Isol

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cutting Isol

    Gang,

    Just got my Isol Board!!! Thanks Valerie at FB.

    How do you cut this stuff? I'm assuming a standard jig saw with the corse wood blade? I'll wear Glasses, gloves and a respirator mask of course.

    Let me know.

    Thanks
    Dick
    I am pouring a 3 1/2 thick perlite/cement layer first - mainly to bring my hearth height up. I know it's overkill but you can't have too much insulation

  • #2
    Re: Cutting Isol

    Hey Badger, I'm right behind you. I finished my perlite/cement layer yesterday, and am waiting for my isol board. Should be here by next weekend. I was hoping I could cut it with a dremel tool, but not sure yet if it will work.
    "Pizza, the world's most perfect food."

    Comment


    • #3
      Re: Cutting Isol

      I used my saws-all. I would think that just about any saw would work. The product is not hard to cut. It makes dust like no other

      Les...
      Check out my pictures here:
      http://www.fornobravo.com/forum/f8/les-build-4207.html

      If at first you don't succeed... Skydiving isn't for you.

      Comment


      • #4
        Re: Cutting Isol

        Les,

        Thanks.

        DUMB, DUMB question? I guess it doesn't matter which size goes up, right?

        Dick

        I'll try my jig saw...

        Comment


        • #5
          Re: Cutting Isol

          I used a product called insblok 19. If I recall, one surface has a little smoother finish than the other - I put that side up. It doesn't matter - it's the same material all the way through.

          There are no dumb questions, except the ones you don't ask.

          Les...
          Check out my pictures here:
          http://www.fornobravo.com/forum/f8/les-build-4207.html

          If at first you don't succeed... Skydiving isn't for you.

          Comment

          Working...
          X