web analytics
anchor plate and pipe in place - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

anchor plate and pipe in place

  • Filter
  • Time
  • Show
Clear All
new posts

  • anchor plate and pipe in place

    -first pic shows dry fit of yesterdays anchor plate work
    -second pic shows inside of vent transition looking up from the inside of entrance way
    -third pic shows anchor and pipe set in place with the fancy rotating rain cap I will put on stainless pipes.

    Attached Files
    Last edited by waynebergman; 12-14-2007, 03:52 PM.
    see below for my oven album of progress to date


  • #2
    Re: anchor plate and pipe in place


    Looks really good. Nice work!

    Everyone makes mistakes. The trick is to make mistakes when nobody is looking.



    • #3
      Re: anchor plate and pipe in place

      Wayne, very nice. I must say, that is a much smoother inside transition than mine. Looks like it will have a good funnel effect into the pipe. Mine is more angular with little transition.

      Good job!