web analytics
To cut, or not to cut (FIRST course!) - Forno Bravo Forum: The Wood-Fired Oven Community



I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

To cut, or not to cut (FIRST course!)

  • Filter
  • Time
  • Show
Clear All
new posts

  • To cut, or not to cut (FIRST course!)


    (M) The Step by Step instructions do not seem to agree with the photos. The instructions say:

    "The first chain is a ring of brick cut in half and standing on their ends, with the thin edge (2 1/2) facing inside the oven. You can adjust the exact diameter of your oven to match the size circle that your bricks form, so that you do not have to cut a brick in your first chain.

    (M) This is not clear to me. Do I cut them to 4.5 x 4.5 x 2.5, or do I leave them UNcut at 9 x 4.5 x 2.5 ?? ____________

    "The subsequent chains are made up of brick cut in half and set on their wide edge (4 1/2") with the clean edge facing in."

    (M) I see 2 accompanying photos. One surely looks like a full soldier; the second, like his little brother. Please look at the images, below and kindly clarify.



    "Everything should be made as simple as possible, ...
    but no simpler!" (Albert Einstein)

  • #2

    You are definitely right. When Jim was building the first Pompeii oven, we debated whether the first course should be full, or cut. He tried the full high, and went up a course or two, and we debated again, and decided that the easiest, and most mainstream solution would be to use a half brick in the first course. The curve of the arch would be more gentle, and easier to build.

    If you do the first brick full height, your curve to the peak of the dome is more aggressive and harder to build, and more demanding of forms. There are ovens made in both styles that I found in our neighborhood in San Gimignano.

    Jim un-did the first few courses, and re-started, and the result was his great first oven.

    What you have found is a photo of the first attempt (which was taken down) that found its way into the final plans. Nice catch.

    I will remove the erroneous photo ASAP. Thanks for keeping us in line!

    Pizza Ovens
    Outdoor Fireplaces


    • #3
      Could we use half bricks in the first & second course?


      (M) Then, Jim, for added stability, could we then use only half bricks, in the same plane as all the other bricks from the start of the cooking floor? This presupposes that the 2nd course does not yet start to curve inward. It is of course staggered over the joints like all other courses. I realize that you want a parabola rather than a hemisphere and this should maintain that parabolic spheroid, or ???


      "Everything should be made as simple as possible, ...
      but no simpler!" (Albert Einstein)