web analytics
I hope this works - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

I hope this works

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I hope this works

    This is the same foam I used for the big floating puck that made the cavity in hearth for insulating concrete. It is easy to shape with sand paper.
    I mixed the Moldit-X mortar on the thick side and a few smaller pieces of brick added in during the application. I sure hope this works.
    Has anyone else done this kind of treatment at the vent opening? Feedback welcome......wayne
    see below for my oven album of progress to date

    http://picasaweb.google.com/wayneber...PizzaOvenWorld

  • #2
    Re: I hope this works

    Hey--

    I checked out your Picasa album, I was going to comment on there but couldn't find where..Ovens looking great I LOVE the stand...

    What year is that Trail 90? I have a 67 I bought 2 years ago, do you have a good source for parts? It runs great but there are some original chassis parts missing that Id like to replace.

    Forget it...Sorry I didn't read the caption....I got so excited about the bike..
    Last edited by Unofornaio; 10-16-2007, 04:14 PM.
    http://www.palmisanoconcrete.com

    Comment


    • #3
      Re: I hope this works

      Wayne,

      I think I understand what you are trying to achieve - looks solid to me. Question; why didn't you just complete the span with brick?

      Uno, I had one of those as well in the early 60's. The add on larger sprocket and a few links of chain did wonders - could climb a wall. I think that was the only bike I had that I didn't get hurt on.

      Les...
      Check out my pictures here:
      http://www.fornobravo.com/forum/f8/les-build-4207.html

      If at first you don't succeed... Skydiving isn't for you.

      Comment


      • #4
        Re: I hope this works

        Les I went with the mortor and small brick fill as I thought cutting the bricks and keeping a symetrical circle would be too tricky. Also using the door template for the arch build as a support for the mortor pour on the inside of the oven should give me a nice smooth look from the outside. I will find out tommorow....wayne
        see below for my oven album of progress to date

        http://picasaweb.google.com/wayneber...PizzaOvenWorld

        Comment


        • #5
          Re: I hope this works

          cutting the bricks and keeping a symmetrical circle would be too tricky.

          Tricky works - I can think of several words that describes the problem

          Good luck, you may be onto a "magic bullet"

          Les...
          Check out my pictures here:
          http://www.fornobravo.com/forum/f8/les-build-4207.html

          If at first you don't succeed... Skydiving isn't for you.

          Comment

          Working...
          X