web analytics
Vent & Chimney - Forno Bravo Forum: The Wood-Fired Oven Community



Forum Issues Update

Things are progressing in getting things back in order on the Forum! User avatars should be showing up. Attachment and inline images are in the process of being uploaded. We are still looking for a migration path for the Photoplog gallery. Thank you for your patience!
See more
See less

Vent & Chimney

  • Filter
  • Time
  • Show
Clear All
new posts

  • Vent & Chimney

    I am finally to my vent and chimney. I just have a couple of questions. A friend is manufacturing my vent out of steel. Is 20 inches long and 8 inches wide to big? The liner is 6" by 2'. I am new at this building thing, so bear with me with my lingo.

  • #2
    Re: Vent & Chimney

    My 39" oven has an 8x8 inch flue and seems to draw just fine.

    There is a lot of information on the site that relates flue size to oven size.

    If you can post a picture it would help. But based on the information, if you have a 20x8 inch transistion to an 8x8 square or 8 inch round, it should work well for the average sized ovens I see built here.

    good luck!!!

    My oven progress -