web analytics
Vent and chimney design - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Vent and chimney design

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vent and chimney design

    I went to my masonry supply this morning to pick up another bag of Heat Stop and a few more firebricks, when he showed me a design from a brochure for a vent and chimney. It was from another company that makes precast ovens (not nearly as nice looking as FB's products btw), but what caught my eye was that the vent chamber/opening was essentially half a large flue liner set on it's side (so it like an arch) with a hole cut into the top to accomodate a chimney flue.

    I think I am going to stick to my original desin of a bricked vent chamber, but this did look interesting. Has anyone here done this type of opening?
    "You better cut the pizza in four pieces because I'm not hungry enough to eat six."

    -- Yogi Berra

    Forno Tito
Working...
X