web analytics
IT without welding? - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

IT without welding?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • IT without welding?

    I want to make an IT, but don't have a welder. I have made a very crude one out of a door hinge, wood strips (for the arm) and a door bracket. Curious if there's anything out there that's better. How'd you make yours if you didn't weld? A link to your build would be great.
    Here's mine:
    http://www.fornobravo.com/forum/f8/j...man-15992.html

  • #2
    Re: IT without welding?

    Anyplace where welding can't be replaced with bolts it can be with JB weld.

    Comment


    • #3
      Re: IT without welding?

      Buy 2 part epoxy let it sit over night and your good either 3m duramix or sem all available just as strong they sell small tubes

      Comment


      • #4
        Re: IT without welding?

        jimkramer
        another method is to use a length of threaded rod with a couple of nuts, adjustable and strong!


        Cheers.

        Neill
        Prevention is better than cure, - do it right the first time!

        The more I learn, the more I realise how little I know


        Neill’s Pompeiii #1
        http://www.fornobravo.com/forum/f8/n...-1-a-2005.html
        Neill’s kitchen underway
        http://www.fornobravo.com/forum/f35/...rway-4591.html

        Comment


        • #5
          Re: IT without welding?

          At first I was thinking about doing something like this...
          But I did have mine welded.
          Attached Files
          My build: http://www.fornobravo.com/forum/f8/4...way-19491.html

          Comment


          • #6
            Re: IT without welding?

            Just in case you find someone who can weld for you this is how I did mine.
            I have a small hobby welder and no experience with welding but I made it stick
            Attached Files
            My build: http://www.fornobravo.com/forum/f8/4...way-19491.html

            Comment


            • #7
              Re: IT without welding?

              Originally posted by Steellearning View Post
              this is how I did mine.
              So why did it need welding?
              It would stay in place by locking the thread up surely?
              The English language was invented by people who couldnt spell.

              My Build.

              Books.

              Comment


              • #8
                Re: IT without welding?

                Steellearning- how'd you affix the threaded rod at the bottom? It seems people often use either a door hinge or caster. I suppose I could drill a big hole in a hinge, then bolt it in place.
                Here's mine:
                http://www.fornobravo.com/forum/f8/j...man-15992.html

                Comment


                • #9
                  Re: IT without welding?

                  Originally posted by brickie in oz View Post
                  So why did it need welding?
                  It would stay in place by locking the thread up surely?
                  The bolt was only used to hold the long nut in place during welding and was removed after. I didn't want to have a nut on the shoe side of the bracket (where the brick is seated). Plus I wanted to try welding...
                  Last edited by Steellearning; 07-25-2013, 08:54 AM.
                  My build: http://www.fornobravo.com/forum/f8/4...way-19491.html

                  Comment


                  • #10
                    Re: IT without welding?

                    Originally posted by jimkramer View Post
                    Steellearning- how'd you affix the threaded rod at the bottom? It seems people often use either a door hinge or caster. I suppose I could drill a big hole in a hinge, then bolt it in place.
                    This is what it looks like... Hope these photos help explain.
                    Not the most beautiful welding, but it stuck...
                    Attached Files
                    My build: http://www.fornobravo.com/forum/f8/4...way-19491.html

                    Comment


                    • #11
                      Re: IT without welding?

                      Countersink a machine bolt through the bracket into a long nut like Steellearning used. Secure the whole thing with some thread locker and/or epoxy. The bracket doesn't need to be all that strong. It just needs to be secure.
                      Name:  cadd5e0dcb405996888fa1d46570396b.jpg
Views: 1
Size:  11.7 KB
                      My build progress
                      My WFO Journal on Facebook
                      My dome spreadsheet calculator

                      Comment


                      • #12
                        Re: IT without welding?

                        Originally posted by deejayoh View Post
                        Countersink a machine bolt through the bracket into a long nut like Steellearning used. Secure the whole thing with some thread locker and/or epoxy. The bracket doesn't need to be all that strong. It just needs to be secure.
                        Name:  cadd5e0dcb405996888fa1d46570396b.jpg
Views: 1
Size:  11.7 KB
                        Much better idea, wish I had thought of that...
                        My build: http://www.fornobravo.com/forum/f8/4...way-19491.html

                        Comment

                        Working...
                        X