web analytics
Final dome keystone: castable? - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Forum Issues Update

Things are progressing in getting things back in order on the Forum! User avatars should be showing up. Attachment and inline images are in the process of being uploaded. We are still looking for a migration path for the Photoplog gallery. Thank you for your patience!
See more
See less

Final dome keystone: castable?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Final dome keystone: castable?

    Hi all,

    So I'm at the stage of planning the final keystone for the dome, and have seen most folks cut theirs out of a brick. This seems to involve tracing and trimming (and even some use of flour to find the high spots by our friend in Bellingham!). But since I had success casting the whole inner arch from refractory concrete, I thought maybe the final keystone could be cast as well. Looks like waynespizzaworld did this a couple years ago (here, and in the 2nd and 3rd photos below). Any reason not to do this?

    Steve
    Attached Files

  • #2
    Re: Final dome keystone: castable?

    Originally posted by pdxsds View Post
    Hi all,

    So I'm at the stage of planning the final keystone for the dome, and have seen most folks cut theirs out of a brick. This seems to involve tracing and trimming (and even some use of flour to find the high spots by our friend in Bellingham!). But since I had success casting the whole inner arch from refractory concrete, I thought maybe the final keystone could be cast as well. Looks like waynespizzaworld did this a couple years ago (here, and in the 2nd and 3rd photos below). Any reason not to do this?

    Steve
    No reason at all. in fact it is easier to cast the whole thing. just be careful to let it dry well before firing because that keystone gets hotter quicker than anything else, because of its position.
    Kindled with zeal and fired with passion.

    Comment

    Working...
    X