web analytics
Floor tile question - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Floor tile question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Floor tile question

    I am gathering materials to build a 42" oven and have come across used "floor tiles" from a commercial pottery kiln. These are actually High temp shelves used in the kiln and I can get them reasonably priced. They are approx. 1" thick and 20" square. Are these acceptable for "flooring" in the oven. I was going to use firebrick but came across these. They are much thinner than using firebrick, should I use one layer or perhaps two or stick with the firebrick?

    This forum is awesome, by reading it I now know too much and need to stop researching and start building!
Working...
X