web analytics
indispensable tool - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Forum Issues Update

Things are progressing in getting things back in order on the Forum! User avatars should be showing up. Attachment and inline images are in the process of being uploaded. We are still looking for a migration path for the Photoplog gallery. Thank you for your patience!
See more
See less

indispensable tool

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • indispensable tool

    Where can I purchase the "indispensable tool" to help align each firebrick within its course?

  • #2
    Re: indispensable tool

    I made my ID tool out of an old hing and yard stick. Just find the center of you oven take 1/2 the diameter of you circle for you radius. I made my oven 42 inches wide and 21 inches high. If you want a Guide for the angle of the bricks add 4 1/2 inches past the radius of the circle on your stick. If you are doing a low dome you may need to adjust the height of your dome to a lower height.

    If you have the ability make your ID tool out of metal, I made mine out of wood and it warped after a few days of being wet.

    Comment


    • #3
      Re: indispensable tool

      I just built mine out of wood. Thanks for the tip. I will definately seal (paint) mine before I start. Maybe that will guard against warping.
      I don't care what folks say behind my back........They are either braggin' or.......lyin'


      My Build
      My Picasa Web Album

      Comment

      Working...
      X