web analytics
hearth done - brick floor and dome next - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

hearth done - brick floor and dome next

  • Filter
  • Time
  • Show
Clear All
new posts

  • hearth done - brick floor and dome next

    hi and happy new year to you all!

    I have laid the hearth using approx 3.5" concrete (with reinforcing rebar somewhere in the middle of that) and approx a further 3.5" vermiculite / cement (6 : 1 by volume) mixture on top. All was well propped up and boxed in, so hopefully that's not going anywhere in a hurry!

    Next step will be to lay my oven floor and start off on the dome. That should be the fun bit! Just a couple of quick questions to the more experienced of you out there:
    1. er .....will the vermiculite layer eventually harden? This was laid 3 days ago and is still crumbly - I have stood on it so it is solid, but I can dig out holes with my finger if I wished.

    2. I have not managed to find any fire clay or refractory cement where I live. Are these really necessary or can I do without either or both of them without risking the oven to cave in?

    thanks for your help!

  • #2
    Re: hearth done - brick floor and dome next

    Happy summer to all of you down south. We just got back from two weeks in the UK and didn't see the sun the whole time.

    Your vermiculite concrete will stay pretty crumbly, but it is up to the task of holding your oven upright and level. It has really good compression strength.

    It will be OK building your oven without refractory mortar, using the fireclay mortar recipe from the plans. But, I would be nervous about not adding the fireclay to the mixture. I would be concerned that a standard mason mortar would spall and eventually burn out/give up -- which would be bad. With all the effort you are going to put into your oven, it would be a shame for it to not last.

    Can you keep looking for fireclay?
    Pizza Ovens
    Outdoor Fireplaces


    • #3
      Re: hearth done - brick floor and dome next

      thanks for that James. I'll keep looking for some fire clay, I'm sure I'll find something but may have to pay extra for freight ....... it is quite frustrating not finding exactly what you need on your doorstep sometimes isn't it??

      Would you be able to tell me more or less how many kgs of fire clay I'd need for a 42" dome?

      It seems like you're having quite a time keeping the spammers out of this forum. Some people just want to spoil it for everyone else - I just hope they don'e manage to ruin this forum coz I think you're doing a great job here!



      • #4
        Re: hearth done - brick floor and dome next

        Hi John. For reference I used 1 bag of fireclay. That was enough to put the brick floor down and to mix enough mortar for the entire dome. I used 1 part fireclay, 1 part lime, 1 part portland, 3 parts sand for the dome mortar. The material is quite light. I don't know the weight of the bag I used, but it was about the same size as an 80 pound bag of concrete.
        - JC


        • #5
          Re: hearth done - brick floor and dome next

          Thanks JC - I'll try to keep this as a benchmark ...... but I'm sure to need more than you as I'm sure to have larger gaps to fill in!!