web analytics
Heat radiation from external wall of oven?? - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Heat radiation from external wall of oven??

  • Filter
  • Time
  • Show
Clear All
new posts

  • Heat radiation from external wall of oven??

    Hi Folks

    Firstly great web site and forum!

    I am in the initial stages of planning a dome oven.

    I have sourced good refractory bricks and mortar.

    At the moment I am setting out possible locations for the oven. I want to place the oven as close to my boundary as possible, but local council restricts the distance to 450mm from the boundary. The neighbouring property is an additional 900mm from the boundary which equates to 1350mm or 1.35 metres from the back of the oven to the neighbours wall (rendered brick).

    I am wondering is this sufficient? I don’t want to burn next door down! I will of course be utilising appropriate materials, insulating bricks below the oven, refractory bricks for the interior, insulation blankets and am currently looking at then covering the oven in sandstone.

    That would be my second question, does the internal oven have the ability to support and additional layer of bricks or stone work?

    Thanks for your time!

    Fail to Prepare...Prepare to Fail!