web analytics
Oven Opening Size - Aga Door?!?!? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Oven Opening Size - Aga Door?!?!?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Oven Opening Size - Aga Door?!?!?

    Hi all,

    Just about to start my WFO but I need to get your thoughts first! I've got myself an old aga door, 37cm (15.5inch) wide x 32cm(12.5) high (with built in thermometer) which I plan to use on my WFO however my oven is only going to be 80cm (32 inch) in diameter therefore using the 63% rule the dome needs to be 51cm(20 inch) high.

    I'm concerned that the dimensions of the door cause problems with cooking as most openings are usually 12 inch high and say 18 inches wide, they also have an arch opening however the aga doors are rectangular therefore the opening needs to be rectangular too.

    Is the door going to cause more problems than it's worth and should I just forget about it altogether?

    Many thanks


  • #2
    Re: Oven Opening Size - Aga Door?!?!?

    Hi Rob,
    The biggest problem I can see first off is the oven you are suggesting is going to be more bee hive (skep) shaped rather than either hemispherical or elliptical (or something akin to those shapes). Just how much the added distance from the hearth to the top of the dome relative to the distance to the sides will effect the cooking I do not know. It seems most people (OK some people, a few people, just how many people?) seem to think a lower dome rather than a higher dome would be preferable at least for baking pizzas.

    I would hazard to suggest that if you want to use that door then perhaps a larger diameter WFO might be worth considering.

    The issue of square entry vs some sort of arch is less of an issue, rather more of a personal preference and individual skill level.

    Hope this helps,


    • #3
      Re: Oven Opening Size - Aga Door?!?!?

      My opening is rectangular, not arched (I have a facade of an arch over it...) so I know that is not a problem. I wonder if the 15" wide is going to be an issue. I think mine is 18 inches wide, but then my oven is 38", so it may still work. Will your biggest pots fit through a 15 inch opening? The 20" high dome makes it more of a "tuscan" oven than a neopolitan oven, but it will work fine for pizzas and roasts and breads...
      My Oven Thread:


      • #4
        Re: Oven Opening Size - Aga Door?!?!?

        I think that's a good idea. Aga cookers are rather pricey to steal doors from, but rayburns are scrapped out all the time, and have nice thermostat mounted insulated enameled iron doors. With a bit of angle grinder work, you could also use a section of the cooker front that has the hinge and latch to support your brick arch, instead of the angle iron.

        I don't think door size is as critical as all that. Good luck with your project.
        My geodesic oven project: part 1, part 2