web analytics
Steel angle to support flue? - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Steel angle to support flue?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Steel angle to support flue?

    I am making my final decisions on the oven vent and how best to transition to the flue. I have my inner door arch mocked up (see attached picture) and was planning on how best to build the vent and transition to the flue.

    Are there issues regarding using steel angle in the vent area? Dissimilar expansion as they get hot?

    The design I an thinking of would have an inner arch that would be attached to the dome. The doorway would then transition to straight walls that would be three bricks taller than the inner arch. I would cut in two pieces of angle steel and place them horizontally across the opening. This would form the support for the flue in the center and the bricks to form the top of the vent area. This would give me a vent that is 20" wide, 6"deep and 5" high.

    The outer doorway would be finished with an arch than matches the inner doorway.

    The soldier course is down and I'm starting the the first chain. Learning as I go!

    Name:  b322bed57ce0093631b3591fdeaf1ae1.jpg
Views: 1
Size:  15.2 KB

  • #2
    Re: Steel angle to support flue?

    "Are there issues regarding using steel angle in the vent area? "

    No. Lots of people have done this. Angle iron would be better than steel due to potential rust issues. If you can't locate angle iron easily, a good source of angle steel is old bed frames.

    Comment


    • #3
      Re: Steel angle to support flue?

      Originally posted by Neil2 View Post
      a good source of angle steel is old bed frames.
      You wont have anywhere to sleep but the pizzas will be good.....
      The English language was invented by people who couldnt spell.

      My Build.

      Books.

      Comment


      • #4
        Re: Steel angle to support flue?

        Good, I have 2x2x1/4 steel angle left from building the stand so I won't need to destroy anyone's bed frame. I bought some hi temp paint so it doesn't rust and hi temp caulk to stick the flue to the angle.

        I'm up to my 5th course, so far so good and fun to see it take shape.

        Comment

        Working...
        X