web analytics
Insulation problem - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Insulation problem

  • Filter
  • Time
  • Show
Clear All
new posts

  • Insulation problem

    I just recently insulated my oven after curing it, and was excited to see how it would hold heat, so i decided to try cooking in it yesterday. About an hour after ignition i noticed that there was smoke coming off the top of the insulation. I know that I already had a couple cracks in the dome, but it was nothing major, i sealed them up anyway with more heatstop before i put the insulation on anyway. Any way, upon further inspection i noticed that it was not smoke that was wafting up but steam. i touched the blanket to make sure, and my hand came away slightly damp. I was just wondering if this is normal. It did rain last week after i wrapped my oven, and it is possible that the tarp i used to cover it leaked water. Does having wet insulation neutralize its heat holding ability?

    The thing that worried me was that even after 3 layers of insulation, the outside of the insulation mesured 133 degrees in some spots. I do not know whether the fact that my oven MAY have been wet was the cause. I was under the inpression that it would feel cool to the touch.

    I was able to cook a pretty fantastic pizza last night by the way, but i didn't notice that big of a difference in heat holding ability. After the fire died out, the oven went cold pretty quickly. I made sure that there were at least 3 inches of blanket around the whole dome, and four inches under the floor. The only reason i can see for my loss of heat is that i don't have a door yet. Is having a door imperative to maintaining heat for days like i heard is possible?

    lol, sorry for the long winded questions, i just want to make sure that my oven will work properly.

  • #2
    Re: Insulation problem

    "I was just wondering if this is normal."

    Perfectly normal. There is a lot of moisture in a new oven. Take your time curing it .


    • #3
      Re: Insulation problem

      Normal, for sure, and the rain likely got into the insulation - no worries.

      But...a door in mandatory for retaining the heat that we all talk about. An insulated door is even better.

      Congrads on finishig your oven.



      • #4
        Re: Insulation problem

        Thanks for the replies. I was really worried that the rain would mess up the insulation and i would have to buy more, but when I came home from work yesterday night, the bricks were still hot even though the oven wasn't at any sort of a cooking temp. So it has to be working to keep the heat in the bricks at least.

        Dusty, how did you build your door. I was thinking of using FB board to keep the heat in, i just don't know what i would encase it in so that it wouldnt just be a loose piece insulation.
        by the way, do you have any pics of your oven up? it would be cool to see another sacramento builders oven


        • #5
          Re: Insulation problem

          I used fb board to insulate my door. Basically, I encased the board in metal and put a handle on it. I will try to post a picture of it but believe me, it is nothing fancy. Works great though.

          I posted pics of my build as I built it, but I never got a photo page-thing together. I think most of my pics are on my thread "dusty dome is 4" tall", but if you really want to see it, come by the house!