web analytics
Looking for advise on Tandoor oven - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Looking for advise on Tandoor oven

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for advise on Tandoor oven

    Want to make a Tandoor oven out of a steel drum (probably 55 gallon) and terra cotta flower pot. I plan to insulate the exterior of the clay pot with perlcrete and surround that with lose perlite (SIMILAR to what others have done on the internet). I plan to put a few inches of perlcrete on the bottom of the drum to thermally insulate it. What I am wondering is whether I need to use fire brick for the floor and to surround the fire or i can use iron. All the designs I have seen on internet use fire bricks, but I am trying to keep the weight down so that it is reasonably transportable (I will probably remove the "pot" when I transport it. Any inputs are welcomed. I was thinking if I use metal, it is also easier to use mix of fuel, inserting LP or placing coals above a grate.
Working...
X