web analytics
building a truss for a barrel vault oven - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

building a truss for a barrel vault oven

  • Filter
  • Time
  • Show
Clear All
new posts

  • building a truss for a barrel vault oven

    We are finishing up the chimney on Monday, then making a truss to support the walls and arches due to the inherently weak design. The picture sent by Tscarborough is my model for the truss. It looks to me that it is made of channel iron, rather than angle iron. I don't know where to get channel iron, only angle iron.

    I want the truss to lie as flat as possible against my walls, especially in front so I can make the facing without the truss interfering. Does it look to you like it is channel iron, and if so, do you have any suggestions as to where I could get that, or something else that would lie flat against the walls and front?

    Attached Files

  • #2
    Re: building a truss for a barrel vault oven

    You are close to Philly, look do a goggle for used steel, check craigs list too or maybe Restore in Philly.

    Link to my Picasa Album