web analytics
making the inner arch for a barrel vault - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

making the inner arch for a barrel vault

  • Filter
  • Time
  • Show
Clear All
new posts

  • making the inner arch for a barrel vault

    Hello. We are working on our last dome arch and need to figure out the inner arch for the vault. We are using WJW's pictures. How do we cut the bricks to make the inner arch? Is it just the middle brick that needs to be narrower on the bottom than the top? Any tips for setting up the arch? Do we build a form for it? Thanks, Sarah and Josh

    The attached picture is one of WJW's and is one of the main ones we are using to figure out the front of the oven.
    Attached Files